Scirocco List Index, November 1996
- Re: Cold Weather Start
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Cold Weather Start
- From: MARK DAVISON <markaab@global2000.net>
- Re: Cold Weather Start
- From: brett@kodak.com (Brett VanSprewenburg)
- Re: My first cop experience
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Cold Weather Start
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Installing stereo - lost some lights
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: My first cop experience
- From: picot@cpcug.org (Chris Picot)
- Re: A few questions: cams
- From: picot@cpcug.org (Chris Picot)
- Re: A few questions: cams
- From: picot@cpcug.org (Chris Picot)
- RE: A few questions: cams
- From: Rodney Noriel <rbn@corp.cirrus.com>
- FW: Cold Weather Start
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Rus's Rough Ride
- From: Chris Taylor <chtaylo4@vt.edu>
- Starter Shot!!
- Re: Rus's Rough Ride
- From: Dan Ruddick <druddick@vt.edu>
- Re: Starter Shot!!
- From: MARK DAVISON <markaab@global2000.net>
- Re: Starter Shot!!
- From: kevin@pelican.net (Kevin McGrath)
- painting trim
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Installing stereo - lost some lights
- From: Mike <lerb@redrose.net>
- Re: painting trim
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: painting trim
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: painting trim
- From: kevin@pelican.net (Kevin McGrath)
- Re: painting trim
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: painting trim
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: painting trim
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: painting trim
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: painting trim
- From: kevin@pelican.net (Kevin McGrath)
- Why we paint our cars.......
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- No Subject
- From: Trnsfrma@ix.netcom.com
- Re:
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- replacement carpet in mk1?
- From: Donovan Porter <dporter@hevanet.com>
- Sears sucks, but I got my money!
- From: James McElvaney <kinkajou@pacificnet.net>
- Re: replacement carpet in mk1?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: replacement carpet in mk1?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Sears sucks, but I got my money!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: replacement carpet in mk1?
- From: Donovan Porter <dporter@hevanet.com>
- Re: replacement carpet in mk1?
- From: "Matt Heffner" <bad90g@epix.net>
- Re: replacement carpet in mk1?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: replacement carpet in mk1?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: replacement carpet in mk1?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Starter Shot!!
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Koni adjustables
- From: VanAm <vanambum@silyn.net>
- Stupid list question
- From: Donovan Porter <dporter@hevanet.com>
- West Coast Metric
- From: Donovan Porter <dporter@hevanet.com>
- Re: Koni adjustables
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Koni adjustables
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Koni adjustables
- From: VanAm <vanambum@silyn.net>
- Re: Koni adjustables
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Stupid list question
- From: Kevin Wenzel <kwenzel@privateI.com>
- Re: Koni adjustables
- From: VanAm <vanambum@silyn.net>
- Re: replacement carpet in mk1 (must see!!!)
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: Koni adjustables
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Door Panels
- From: Dan Ruddick <druddick@vt.edu>
- Re: replacement carpet in mk1 (must see!!!)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- West Coast Metric. (carpet kits)
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: West Coast Metric. (carpet kits)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Why we paint our cars.......
- From: picot@cpcug.org (Chris Picot)
- test
- From: jdoc@postoffice.ptd.net
- Re: Why we paint our cars.......
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: test
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- natcc
- From: Andre Bjorkheim <andreb@u.washington.edu>
- A1 headlights
- From: jdoc@postoffice.ptd.net
- Re: natcc
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Shock info
- Re: Starter Shot!!
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: natcc
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Shock info
- From: MARK DAVISON <markaab@global2000.net>
- Gene, did you try to return that carpet?
- From: David Ian Utley <diutley@telepath.com>
- Does anyone know the address for the Audi list?
- From: David Ian Utley <diutley@telepath.com>
- Stalling and power steering??
- Re: Starter Shot!!
- From: MARK DAVISON <markaab@global2000.net>
- A1 headlights, again
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: A1 headlights
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: your mail
- From: "John K. Gates" <john@fang.cs.sunyit.edu>
- Re: Scirocco list Geography (send me your info)
- From: "John K. Gates" <john@fang.cs.sunyit.edu>
- Re: A1 headlights, again
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: A1 headlights, again
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Scirocco list Geography (send me your info)
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: gear speeds and RPMS questions
- From: "John K. Gates" <john@fang.cs.sunyit.edu>
- Re: gear speeds and RPMS questions
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: gear speeds and RPMS questions
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Anybody going to the Sheew?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: A1 headlights
- From: "Don Dawson" <motley@smtp.ajaxshuttle.com>
- Re: Scirocco list Geography (send me your info)
- From: "Don Dawson" <motley@smtp.ajaxshuttle.com>
- Re: Scirocco list Geography (send me your info)
- From: "Jeremy R. Bromley" <jbromley@enterprise.net>
- Re: Stalling and power steering??
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- mark?
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: A1 headlights, again
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: your mail
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: your mail
- From: Dan Ruddick <druddick@vt.edu>
- Re: Anybody going to the Sheew?
- Ahh paint Jobs...
- Re: Anybody going to the Sheew?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: mark?
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: Anybody going to the Sheew?
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Anybody going to the Sheew?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Anybody going to the Sheew?
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Anybody going to the Sheew?
- From: Josh Clark <jclark@prolog.net>
- Re: Anybody going to the Sheew?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Anybody going to the Sheew?
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Anyone wants pics of my 80 Scirocco?
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- I take it you can't send files....
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: A1 headlights
- From: Miles Lott <milos@insync.net>
- Re: A1 headlights, again
- From: Miles Lott <milos@insync.net>
- Re: A1 headlights, again
- From: MARK DAVISON <markaab@global2000.net>
- Re: Ahh paint Jobs...
- From: MARK DAVISON <markaab@global2000.net>
- Re: mark?
- From: MARK DAVISON <markaab@global2000.net>
- Re: replacement carpet in mk1?
- From: Miles Lott <milos@insync.net>
- WTB:Power window regulators
- From: Miles Lott <milos@insync.net>
- FW: Koni adjustables
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- FW: A1 headlights
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: I take it you can't send files....
- From: Kevin Wenzel <kwenzel@privateI.com>
- Re: Koni adjustables
- From: Brandon Sommerville <brandon@caseware.com>
- Bad starts?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: FW: Koni adjustables
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Anyone wants pics of my 80 Scirocco?
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: I take it you can't send files....
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: FW: Koni adjustables
- From: VanAm <vanambum@silyn.net>
- Re: Teardrops?
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Stalling and power steering??
- Re: Stalling and power steering??
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: A1 headlights
- From: Mike <lerb@redrose.net>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- From: Mike <lerb@redrose.net>
- Re: your mail
- From: jbromley@mail.enterprise.net
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Stalling and power steering??
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Ahh paint Jobs...
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: gear speeds and RPMS questions
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: gear speeds and RPMS questions
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: gear speeds and RPMS questions
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: gear speeds and RPMS questions
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: Stalling and power steering??
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Josh Clark <jclark@prolog.net>
- Re: gear speeds and RPMS questions
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- nice car Gene
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re:Installing stereo - crutchdfield??
- Re: nice car Gene
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: gear speeds and RPMS questions
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Miles Lott <milos@insync.net>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- From: MARK DAVISON <markaab@global2000.net>
- Neuspeed Ejector Seats
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: Ahh paint Jobs...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Neuspeed Ejector Seats
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Painting Rims
- Re:Installing stereo - crutchdfield??
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: Painting Rims
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- Re: Painting Rims
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Alignment?
- From: Brandon Sommerville <brandon@caseware.com>
- Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- Tri rims!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!??????
- Removing Pin Striping
- From: Dan Ruddick <druddick@vt.edu>
- Re: Ahh paint Jobs...
- From: Mike <lerb@redrose.net>
- Re: Painting Rims
- Re: Painting Rims
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: 16v vs. 8v
- Re: Removing Pin Striping
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Mike <lerb@redrose.net>
- Re: Painting Rims
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: nice car Gene
- From: "CarAudio" <caraudio@ici.net>
- Re: Painting Rims
- From: Jay Docherty <jdoc@ptdprolog.net>
- Re: Painting Rims
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Removing Pin Striping
- Re: Ahh paint Jobs...(Now wheel suggestions to 'Rocco's)
- From: Josh Clark <jclark@prolog.net>
- Re: Is this a unique problem?
- From: Josh Clark <jclark@prolog.net>
- Re: Removing Pin Striping
- From: Chris Taylor <chtaylo4@vt.edu>
- Update on power steering and stalling
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Neuspeed Ejector Seats
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Removing Pin Striping
- Re:Installing stereo - crutchdfield??
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Removing Pin Striping
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Neuspeed Ejector Seats
- Re: Painting Rims
- Re: Ahh paint Jobs...(Now wheel suggestions to 'Rocco's)
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Ahh paint Jobs...
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Painting Rims
- From: Dan Ruddick <druddick@vt.edu>
- Re: Update on power steering and stalling
- Re: Removing Pin Striping
- From: MARK DAVISON <markaab@global2000.net>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Pin Striping and Ronal Rims
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: Update on power steering and stalling
- From: MARK DAVISON <markaab@global2000.net>
- Re: Ahh paint Jobs...
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Update on power steering and stalling
- From: Sean Conway <Sean_Conway.PANDP@PANDP.co.uk>
- Re: Removing Pin Striping
- From: Dan Ruddick <druddick@vt.edu>
- Re: Pin Striping and Ronal Rims
- From: Dan Ruddick <druddick@vt.edu>
- Re: Update on power steering and stalling
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Update on power steering and stalling
- From: Chris Taylor <chtaylo4@vt.edu>
- Possibly some New Members...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Update on power steering and stalling
- From: Sean Conway <Sean_Conway.PANDP@PANDP.co.uk>
- Re: Update on power steering and stalling
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Pin Striping and Ronal Rims
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Update on power steering and stalling
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: 16v vs. 8v
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: Painting Rims
- From: MARK DAVISON <markaab@global2000.net>
- Scirocco saga continues...
- From: Ryan Schuermann <ryan@nwpros.com>
- Good Joke
- From: josh clark <jclark@postoffice.ptd.net>
- Result of power steering posts
- Changing engine mounts..
- Re: Neuspeed Ejector Seats
- Re: Changing engine mounts..
- From: Darren Dunn <darren@neo.lrun.com>
- Re: Changing engine mounts..
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Poly strut bearing experience?
- From: Josh Clark <jclark@prolog.net>
- Re: Poly strut bearing experience?
- From: Chris Taylor <chtaylo4@vt.edu>
- Potential new members...
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Pin Striping and Ronal Rims
- From: "Lisa & Rick" <hugacub@whidbey.net>
- More carpet for Scirocco mk1
- From: Donovan Porter <dporter@hevanet.com>
- I love Poly strut bearings
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Potential new members...
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Rust repair Q's
- From: byoshida@zygote.hsc.usc.edu (Benton Yoshida)
- RE:Subject: Potential new members...
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- Re: Potential new members...
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Poly strut bearing experience?
- From: Josh Clark <jclark@prolog.net>
- Re: Potential new members...
- From: brett@kodak.com (Brett VanSprewenburg)
- Re: Poly strut bearing experience?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Changing engine mounts..
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: I love Poly strut bearings
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re:
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Is this a unique problem?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Painting Rims
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: gear speeds and RPMS questions
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Painting Rims
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Alignment?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Pin Striping and Ronal Rims
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Changing engine mounts..
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Update on power steering and stalling
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Removing Pin Striping
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Alignment?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Changing engine mounts..
- From: MARK DAVISON <markaab@global2000.net>
- Re: gear speeds and RPMS questions
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Painting Rims
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: I love Poly strut bearings
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: gear speeds and RPMS questions
- From: Chris Taylor <chtaylo4@vt.edu>
- VW's best invention! <WAS> "Neuspeed Ejector Seats"
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Alignment?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Poly strut bearing experience?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: gear speeds and RPMS questions
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: gear speeds and RPMS questions
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Alignment?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Ahh paint Jobs...( What's a heat cycle?)
- From: Josh Clark <jclark@prolog.net>
- Re[2]: Changing engine mounts..
- Re: 16v vs. 8v
- From: jbromley@mail.enterprise.net
- Re: Re[2]: Changing engine mounts..
- Sponsers and discounts...
- Shawn, Borbet type C is the pick...
- From: David Ian Utley <diutley@telepath.com>
- NABBED!!!!!!
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Shawn, Borbet type C is the pick...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Re[2]: Changing engine mounts..
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Sponsers and discounts...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Shawn, Borbet type C is the pick...
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: What's a heat cycle?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Differentials
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: NABBED!!!!!!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Shawn, Borbet type C is the pick...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- mk1 / mk2
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Is this a unique problem?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Changing Engine Mounts
- From: picot@cpcug.org (Chris Picot)
- Racing questions...
- From: Josh Clark <jclark@prolog.net>
- Did any 16v's come without AC?
- From: Josh Clark <jclark@prolog.net>
- Re: Racing questions...
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Re[2]: Changing engine mounts..
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Is this a unique problem?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Racing questions...
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Is this a unique problem?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Um.... what's a SCI-SHARK-O ?
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- Re: What's a heat cycle?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Changing engine mounts..
- From: Bagheera <st_gcurl@tarleton.edu>
- Re: Did any 16v's come without AC?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Is this a unique problem?
- From: Bagheera <st_gcurl@tarleton.edu>
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- rejuvinating window rubber
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: What's a heat cycle?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- Re: 16v vs. 8v (16V with low end power)
- From: Kevin McGrath <kevin@pelican.net>
- Re: Ahh paint Jobs...
- From: VanAm <vanambum@silyn.net>
- Re: Is this a unique problem?
- From: VanAm <vanambum@silyn.net>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v (16V with low end power)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Is this a unique problem? (won't rev past a point')
- From: Kevin McGrath <kevin@pelican.net>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- 16v vs. 8v: Fact vs. Myth
- From: Dan Ruddick <druddick@vt.edu>
- Re: 16v vs. 8v
- From: josh clark <ricky@tech.idt.net>
- Re: 16v vs. 8v
- From: "Brandon Rife" <brandon@redrose.net>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Chris Taylor <chtaylo4@vt.edu>
- two-engined scirocco
- From: "Brandon Rife" <brandon@redrose.net>
- Re: two-engined scirocco
- Re:changing engine mounts
- From: josh clark <ricky@tech.idt.net>
- Re: Is this a unique problem?
- From: josh clark <ricky@tech.idt.net>
- Re: 16v vs. 8v
- From: josh clark <ricky@tech.idt.net>
- Re: 16v vs. 8v..............
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v: Fact vs. Myth
- From: jdoc@postoffice.ptd.net
- Re: 16v vs. 8v
- From: josh clark <ricky@tech.idt.net>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Dan Ruddick <druddick@vt.edu>
- Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise
- From: Josh Clark <jclark@prolog.net>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Josh Clark <jclark@prolog.net>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Brandon, sounds like your computer...
- From: David Ian Utley <diutley@telepath.com>
- Re: Is this a unique problem?
- From: jdoc@postoffice.ptd.net
- Re: Clutch advise
- From: jdoc@postoffice.ptd.net
- Re: 16v vs. 8v: Fact vs. Myth
- From: Kevin McGrath <kevin@pelican.net>
- Re: Clutch Advice
- From: David Ian Utley <diutley@telepath.com>
- Stupid questions
- From: jdoc@postoffice.ptd.net
- The VW gallery
- From: jdoc@postoffice.ptd.net
- 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v
- From: "Ramon R. Delgado" <titod@worldnet.att.net>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Dan Ruddick <druddick@vt.edu>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- Re: two-engined scirocco
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Clutch advise
- From: MARK DAVISON <markaab@global2000.net>
- Re: Clutch advise
- From: MARK DAVISON <markaab@global2000.net>
- Re: 16v vs. 8v: Fact vs. Myth
- From: Josh Clark <jclark@prolog.net>
- Re: Stupid Quesions
- From: Josh Clark <jclark@prolog.net>
- Re: The VW gallery
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: The VW gallery
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs. 8v: Fact vs. Myth
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Stupid Quesions
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: The VW gallery
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Euro Bumpers
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Euro Bumpers
- From: VanAm <vanambum@silyn.net>
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- Re: The VW gallery
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Ahh paint Jobs...
- Re: Ahh paint Jobs...
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Advance Timing on a 16v? Speedy response please
- From: Josh Clark <jclark@prolog.net>
- Re: Advance Timing on a 16v? Speedy response please
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Euro Bumpers
- From: Dan Ruddick <druddick@vt.edu>
- Advice!(sp)
- From: James McElvaney <kinkajou@pacificnet.net>
- Re: Euro Bumpers
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Advice!(sp)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise (more, please!)
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise (more, please!)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Rust repair Q's (redux)
- From: byoshida@zygote.hsc.usc.edu (Benton Yoshida)
- Re: Euro Bumpers
- Re: Clutch advise
- Re: 16v vs. 8v
- Re: 16v vs. 8v: Fact vs. Myth
- Re: Stupid Quesions
- Re: 16v vs 8v
- Re: 16v vs 8v
- From: Miles Lott <milos@insync.net>
- Re: Euro Bumpers
- From: jbromley@mail.enterprise.net
- Re: Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- apology
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Advance Timing on a 16v? Speedy response please
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Advance timing??? Can someone respond ASAP
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- 1.6 , 1.8 help
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: Mike <lerb@redrose.net>
- Re: 16v vs. 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Rust repair Q's (redux)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Stupid Quesions
- From: Dan Ruddick <druddick@vt.edu>
- Re: 16v vs 8v
- From: Dan Ruddick <druddick@vt.edu>
- Re: Euro Bumpers
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Clutch advise
- Re: Advance Timing on a 16v? Speedy response please
- The lights are on...
- Re: 16v vs 8v
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Clutch advise
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Clutch advise (more, please!)
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: 16v vs 8v
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: 16v vs 8v (poor GTI)
- From: Kevin McGrath <kevin@pelican.net>
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v
- From: Kevin McGrath <kevin@pelican.net>
- Re: scirocco-l-digest V1 #26
- From: David Ian Utley <diutley@telepath.com>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Euro Bumpers
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise (more, please!)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs 8v (poor GTI)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise (more, please!)
- Re: Clutch advise
- Re: 16v vs 8v
- Re: 16v vs 8v (poor GTI)
- Re: 16v vs 8v (poor GTI)
- Re: 16v vs 8v
- Re: Is this a unique problem?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: 16v vs. 8v
- From: Brandon Sommerville <brandon@caseware.com>
- Re: 16v vs 8v
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: scirocco-l-digest V1 #26
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Stupid Quesions
- From: MARK DAVISON <markaab@global2000.net>
- Re: Clutch advise
- From: MARK DAVISON <markaab@global2000.net>
- my sic post
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: my sic post
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Clutch advise
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: 16v vs 8v
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: my sic post
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: 16v vs 8v (You got a Problem with me!)
- From: Kevin McGrath <kevin@pelican.net>
- Re: 16v vs 8v
- From: Vigus <avigus@wsunix.wsu.edu>
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- Re: Stupid Quesions
- Re: The lights are on...
- From: josh clark <jclark@ptd.net>
- 7.5" wheel
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Interior lights
- Re: The lights are on...
- Re: Interior lights
- From: Mike <lerb@redrose.net>
- My first Autox ruled!
- From: josh clark <jclark@ptd.net>
- Re: My first Autox ruled!
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Did any 16v's come without AC?
- From: tjarrett@olie.wvitcoe.wvnet.edu (Todd Jarrett)
- Re: 16v vs 8v
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Which vw to buy?
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Which vw to buy?
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Which vw to buy?
- From: josh clark <jclark@ptd.net>
- Re: Clutch advise (more, please!)
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Which vw to buy? (There are NO A2 Sciroccos)
- From: Kevin McGrath <kevin@pelican.net>
- Which car to buy????
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Interior lights
- From: Miles Lott <milos@insync.net>
- Power mirrors
- From: Miles Lott <milos@insync.net>
- Re: Interior lights
- Re: My first Autox ruled!
- Re: Interior lights
- From: "James A. Gardiner" <jg140@prism.gatech.edu>
- Re: My first Autox ruled!
- From: MARK DAVISON <markaab@global2000.net>
- Rim size, scirocco
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Interior lights
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Interior lights
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: Rim size, scirocco
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: my sic post
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Power mirrors
- From: Kevin McGrath <kevin@pelican.net>
- RE: Rim size, scirocco
- From: VanAm <vanambum@silyn.net>
- RE: Rim size, scirocco (rubbing)
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: Which vw to buy?
- Re: Which vw to buy?
- Re: Clutch advise (more, please!)
- Re: Which vw to buy? (A2 Scirocco's are rare for some reason...)
- From: Josh Clark <jclark@prolog.net>
- Re: My first Autox ruled!
- Re: Interior lights
- So... anyone have Autotech anti-sway bars?
- From: Josh Clark <jclark@prolog.net>
- Re: Rim size, scirocco
- From: Andre Bjorkheim <andreb@u.washington.edu>
- RE: Rim size, scirocco (rubbing)
- From: Andre Bjorkheim <andreb@u.washington.edu>
- RE: Rim size, scirocco (rubbing)
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- instrument cluster
- From: Nigel Heron <nigelh@connectmmic.net>
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- No Subject
- From: Trnsfrma@ix.netcom.com
- Re: instrument cluster
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: So... anyone have Autotech anti-sway bars?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Which vw to buy? (There are NO A2 Sciroccos)
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Which vw to buy?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: My first Autox ruled!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: instrument cluster
- From: MARK DAVISON <markaab@global2000.net>
- Re:
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: My first Autox ruled!
- From: John Penoyer <jpenoyer@wwnet.com>
- Re: So... anyone have Autotech anti-sway bars?
- From: John Penoyer <jpenoyer@wwnet.com>
- Which car .. the Rabbit GTI !!!
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: Which vw to buy? (A2 Scirocco's are rare for some reason...)
- From: Brandon Sommerville <brandon@caseware.com>
- Re: So... anyone have Autotech anti-sway bars?
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Which vw to buy?
- From: VanAm <vanambum@silyn.net>
- Rev Limiter
- From: Chris Taylor <chtaylo4@vt.edu>
- Autocrossing is wonderful
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Which vw to buy?
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: instrument cluster
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: So... anyone have Autotech anti-sway bars?
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Rev Limiter
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- A funny story...
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: So... anyone have Autotech anti-sway bars?
- From: Dan Ruddick <druddick@vt.edu>
- Re: So... anyone have Autotech anti-sway bars?
- From: brett@kodak.com (Brett VanSprewenburg)
- Re:
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- You all should read this warning, sorry it's not rocco related(fwd)
- From: Josh Clark <jclark@TECH.IDT.NET>
- Re: You all should read this warning, sorry it's not rocco related(fwd)
- From: Kevin Wenzel <kwenzel@privateI.com>
- Re: You all should read this warning, sorry it's not rocco related(fwd)
- From: Brandon Sommerville <brandon@caseware.com>
- Re:
- From: MARK DAVISON <markaab@global2000.net>
- Re: So... anyone have Autotech anti-sway bars?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- '85 Scirocco Owner's Manual
- From: joan <joan@hooked.net>
- Re: My first Autox ruled!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: You all should read this warning, sorry it's not rocco related(fwd)
- From: "Rich Garrett"<jrgarre@uswest.com>
- Re: '85 Scirocco Owner's Manual
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: '85 Scirocco Owner's Manual
- From: Brandon Sommerville <brandon@caseware.com>
- Re: My first Autox ruled!
- From: "Motley" <motley@smtp.ajaxshuttle.com>
- Re: You all should read this warning, sorry it's not rocco related(fwd)
- From: Kevin Wenzel <kwenzel@privateI.com>
- Re: You all should read this warning, sorry it's not rocco related(fwd)
- From: "mail.ptd.net" <help@mail.idt.net>
- Rear Wipers...
- From: jbromley@mail.enterprise.net
- Re: So... anyone have Autotech anti-sway bars?
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Eudora
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Rear Wipers...
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Rear Wipers...
- From: Vigus <avigus@wsunix.wsu.edu>
- (Fwd) SCAM Alert
- From: jbromley@mail.enterprise.net
- Re: Which car .. the Rabbit GTI !!!
- From: "mail.ptd.net" <help@mail.idt.net>
- '85 Scirocco Owner's Manual
- From: "Cowan, Rob/CVO" <rcowan@CH2M.com>
- Re: Autocrossing is wonderful
- From: "mail.ptd.net" <help@mail.idt.net>
- Re: So... anyone have Autotech anti-sway bars?
- From: josh clark <help@mail.idt.net>
- Can I stay in prepared with a new engine?
- From: Jay DOcherty <jdoc@ptd.net>
- Re: Autocrossing is wonderful
- From: Jay DOcherty <jdoc@ptd.net>
- Re: Autocrossing is wonderful
- From: josh clark <help@mail.idt.net>
- Re: My first Autox ruled!
- Re: Which car .. the Rabbit GTI !!!
- Re: Which vw to buy?
- Re: Autocrossing is wonderful
- Re: So... anyone have Autotech anti-sway bars?
- Re: Rev Limiter
- Re: '85 Scirocco Owner's Manual
- Re: Rev Limiter
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Autocrossing is wonderful
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Rev Limiter
- From: Dan Ruddick <druddick@vt.edu>
- Re: Rev Limiter
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: get a real mail client !
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: '85 Scirocco Owner's Manual
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Can I stay in prepared with a new engine?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: '85 Scirocco Owner's Manual
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Get PowWow and a new mail client Shawn.
- From: kevin@pelican.net (Kevin McGrath)
- Re: '85 Scirocco Owner's Manual
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Get PowWow and a new mail client Shawn.
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Leather care
- From: Miles Lott <milos@insync.net>
- Re: So... anyone have Autotech anti-sway bars?
- From: MARK DAVISON <markaab@global2000.net>
- Re: Eudora
- From: MARK DAVISON <markaab@global2000.net>
- Re: Eudora
- From: Darren Dunn <darren@neo.lrun.com>
- Re: Rear Wipers...
- Re: Rear Wipers...
- Re: '85 Scirocco Owner's Manual
- From: joan <joan@hooked.net>
- Source for autox rules
- From: "Rich Garrett"<jrgarre@uswest.com>
- Re: '85 Scirocco Owner's Manual
- From: joan <joan@hooked.net>
- Let's have a PowWow!
- From: Josh Clark <jclark@prolog.net>
- Re: So... anyone have Autotech anti-sway bars?
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Eudora
- From: Brandon Sommerville <brandon@caseware.com>
- Re: get a real mail client !
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Best speaker config in a Scirocco?
- From: Tim Ebling <tim@surrealsoft.com>
- Re: Autocrossing is wonderful
- Re: Autocrossing is wonderful
- Re: Rev Limiter
- Re: Autocrossing is wonderful
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Advance Timing on a 16v? Speedy response please
- From: brett@kodak.com (Brett VanSprewenburg)
- Re: Best speaker config in a Scirocco?
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: Best speaker config in a Scirocco?
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Let's have a PowWow!
- From: Kevin McGrath <kevin@pelican.net>
- Re: Eudora
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- US/Euro acceleration
- From: VanAm <vanambum@silyn.net>
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Let's have a PowWow!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Clutch advise
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: Best speaker config in a Scirocco?
- From: MARK DAVISON <markaab@global2000.net>
- Re: Rear Wipers...
- From: jbromley@mail.enterprise.net
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Rear Wipers...
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Let's have a PowWow!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: So... anyone have Autotech anti-sway bars?
- Re: Autocrossing is wonderful
- rev limiter
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: '85 Scirocco Owner's Manual
- From: "Lisa & Rick" <hugacub@whidbey.net>
- sikkens paint
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: rev limiter
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Autocrossing is wonderful
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- sikkens paint
- From: Andre Bjorkheim <andreb@u.washington.edu>
- A/C Control Lever
- From: "Rich Garrett"<jrgarre@uswest.com>
- How fast are you?
- From: byoshida@zygote.hsc.usc.edu (Benton Yoshida)
- Re: How fast are you?
- From: John Fulmer <genefulm@wsunix.wsu.edu>
- Re: How fast are you?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: How fast are you?
- From: Brandon Sommerville <brandon@caseware.com>
- Re: How fast are you?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Best speaker config in a Scirocco?
- Re: Autocrossing is wonderful
- Re: US/Euro acceleration
- Re: How fast are you?
- From: byoshida@zygote.hsc.usc.edu (Benton Yoshida)
- Re: A/C Control Lever
- Re: How fast are you?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: US/Euro acceleration
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: US/Euro acceleration
- From: Sean <qatboy@richmond.infi.net>
- Re: How fast are you?
- From: Sean <qatboy@richmond.infi.net>
- just when you thought I had all the advise I could handle.....
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: just when you thought I had all the advise I could handle.....
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: just when you thought I had all the advise I could han
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: US/Euro acceleration
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: just when you thought I had all the advise I could handle.....
- From: MARK DAVISON <markaab@global2000.net>
- Re: just when you thought I had all the advise I could handle.....
- From: MARK DAVISON <markaab@global2000.net>
- Re: just when you thought I had all the advise I could ha
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: Autocrossing is wonderful
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: just when you thought I had all the advise I could handle.....
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Autocrossing is wonderful
- From: Kevin McGrath <kevin@pelican.net>
- Re: just when you thought I had all the advise I could ha
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: just when you thought I had all the advise I could ha
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: just when you thought I had all the advise I could ha
- From: Mike <lerb@redrose.net>
- Re: Autocrossing is wonderful
- Scirocco BHPs...
- From: jbromley@mail.enterprise.net
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: sikkens paint
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: How fast are you?
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: US/Euro acceleration
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: How fast are you?
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: How fast are you?
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: just when you thought I had all the advise I could handle.....
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: just when you thought I had all the advise I could handle.....
- From: Josh Clark <jclark@prolog.net>
- A1 headlights UPDATE
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: just when you thought I had all the advise I could ha
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: just when you thought I had all the advise I could ha
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: just when you thought I had all the advise I could han
- From: "Lisa & Rick" <hugacub@whidbey.net>
- Re: sikkens paint
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: just when you thought I had all the advise I could han
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Autocrossing is wonderful
- Re: just when you thought I had all the advise I could handle.....
- Re: sikkens paint
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Autocrossing is wonderful
- From: Chris Taylor <chtaylo4@vt.edu>
- tribal net thingy.
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: How fast are you?
- From: Chris Taylor <chtaylo4@vt.edu>
- Help - Stuck In Third Gear
- Help - stuck in 3rd gear
- Re: Help - Stuck In Third Gear
- From: Chris Taylor <chtaylo4@vt.edu>
- CHange the subject, Chris Taylors a Punk!
- From: Kevin McGrath <kevin@pelican.net>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Chris Taylor <chtaylo4@vt.edu>
- Think I should powder coat the intake manifold too? =)
- From: Josh Clark <jclark@prolog.net>
- Re: Think I should powder coat the intake manifold too? =)
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Josh Clark <jclark@prolog.net>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: Source for autox rules
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: (GREAT!) Source for autox rules
- From: Josh Clark <jclark@prolog.net>
- Re: Think I should powder coat the intake manifold too? =)
- From: Kevin McGrath <kevin@pelican.net>
- Re: Autocrossing is wonderful
- Re: tribal net thingy.
- Re: Autocrossing is wonderful
- Re: Help - stuck in 3rd gear
- Re: Think I should powder coat the intake manifold too? =)
- Re: How fast are you?
- From: Sean <qatboy@richmond.infi.net>
- Re: A/C Control Lever
- From: "Rich Garrett"<jrgarre@uswest.com>
- Re: A/C Control Lever
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: just when you thought I had all the advise I could han
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: A/C Control Lever
- From: "Rich Garrett"<jrgarre@uswest.com>
- Re: just when you thought I had all the advise I could handle.....
- From: MARK DAVISON <markaab@global2000.net>
- Oil pressure gauge wanted!!
- From: Ilias Glavinas <eg1@ee.wustl.edu>
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Oil pressure gauge wanted!!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Autocrossing is wonderful
- From: Bart van Hout <bart.hout@pi.net>
- Re: Oil pressure gauge wanted!!
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Autocrossing is wonderful
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: A/C Control Lever
- Re: CHange the subject, Chris Taylors a Punk!
- Re: A/C Control Lever
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Autocrossing is wonderful
- Re: CHange the subject, Chris Taylors a Punk!
- From: Kevin McGrath <kevin@pelican.net>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- Re: your mail
- From: Night Shadow <soltwede@ucsub.colorado.edu>
- Hey all, I got some stuff if you want it; plus a cool update
- From: Josh Clark <jclark@prolog.net>
- 1) about 3rd gear 2) about the AC lever 3) about ballast resistor
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: CHange the subject, Chris Taylors a Punk!
- rus's 3rd gear
- From: Chris Taylor <chtaylo4@vt.edu>
- Re: A/C Control Lever
- From: Brandon Sommerville <brandon@caseware.com>
- Re: Autocrossing is wonderful
- From: VanAm <vanambum@silyn.net>
- Re: CHange the subject, Chris Taylors a Punk!
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Chris Taylor <chtaylo4@vt.edu>
- No Subject
- From: Domenic Lippolis <dom@aorta.med.yale.edu>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: A/C Control Lever (fwd)
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Autocrossing is wonderful
- From: Sean <qatboy@richmond.infi.net>
- Re: 1) about 3rd gear 2) about the AC lever 3) about ballast resistor
- Re: CHange the subject, Chris Taylors a Punk!
- From: Dan Ruddick <druddick@vt.edu>
- Re: A/C Control Lever (fwd)
- From: MARK DAVISON <markaab@global2000.net>
- Re: CHange the subject, Chris Taylors a Punk!
- Re: A/C Control Lever
- Re: Best speaker config in a Scirocco? (fwd)
- Re: A/C Control Lever (fwd)
- Re: rus's 3rd gear
- RE: Best speaker config in a Scirocco? (fwd)
- From: Tim Ebling <tim@surrealsoft.com>
- Re: CHange the subject, Chris Taylors a Punk!
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- the "third" front speaker
- From: "Jay Docherty" <jdoc@postoffice.ptd.net>
- Re: the "third" front speaker
- From: Mike <lerb@redrose.net>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Mike <lerb@redrose.net>
- RE: Best speaker config in a Scirocco? (fwd)
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Elec Problems
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: CHange the subject, Chris Taylors a Punk!
- Fronts are in!!!!
- Re: CHange the subject, Chris Taylors a Punk!
- From: Shawn Meze <Trnsfrma@ix.netcom.com>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: CHange the subject, Chris Taylors a Punk!
- From: Vigus <avigus@wsunix.wsu.edu>
- Re: Best speaker config in a Scirocco?
- From: Dan Ruddick <druddick@vt.edu>
- Re: rus's 3rd gear
- Re: Best speaker config in a Scirocco? (fwd)
- Re: Best speaker config in a Scirocco? (fwd)
- Re: Best speaker config in a Scirocco? (fwd)
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Elec Problems
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- Re: Elec Problems
- From: Ryan Schuermann <ryan@nwpros.com>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Erik Wu <erikwu@idirect.com>
- Re: Elec Problems
- From: Josh Clark <jclark@prolog.net>
- '84 GTi project
- RE: Best speaker config in a Scirocco? (fwd)
- From: Tim Ebling <tim@surrealsoft.com>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Andre Bjorkheim <andreb@u.washington.edu>
- Re: Fronts are in!!!!
- From: Mats Waltersson <pigge@swipnet.se>
- DOM
- From: "GREAVES, AMNA" <AGREAVES@eng.pria.com>
- Re: Best speaker config in a Scirocco? (fwd)
- From: Kyle Binney <KDB96001@uconnvm.uconn.edu>
- RE: Best speaker config in a Scirocco? (fwd)
- From: Ryan Schuermann <ryan@nwpros.com>
- Help and suggestions on a Fox
- From: Ryan Schuermann <ryan@nwpros.com>