Re: Clutch advise

["Lisa & Rick" <hugacub@whidbey.net>]

On  9 Nov 96 at 12:49, MARK DAVISON wrote:

> >I remember reading that it's a good idea to replace the flywheel
> >bolts after removing it.  Any other things I should be thinking of
> >while I'm preparing to have this done?  
> 
> It is nice but not absolutely necessary. What is very important it
> to re-seal the threads on these bolts or oul will leak through the
> crank onto the clutch.

What's recommended to reseal the threads?  I have some silicone 
gasket sealer (blue) that I use for thermostats, etc.  Is this ok for 
this?

Rick    hugacub@whidbey.net
85 Scirocco 8V  Wolfsburg
Oak Harbor, WA
(On Whidbey Island in the Puget Sound)
--
To subscribe or unsubscribe, send email to scirocco-l-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.