[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Dan n Friends Help me trouble shoot my DPR trouble shoot tool.



Sorry so late but this helped me a lot when I first started messing with
CIS-E

http://members.dslextreme.com/users/vwtuning/vwtuning1.html

On 3/13/07, David Brown <sharpshooter33@roadrunner.com> wrote:
>
> Hmm I cheated on the wires. I didn't use the DMM one's I used 16ga and
> bought the bananna clip connectors from Ratshack... I can buy a whole DMM
> at
> Harbor Freight for $4 so I really didn't want to waste the wires.  They
> cost
> over that at Ratshack for just the wires... 8-)
> So I bought the bananna plugs for $2.50 and used my own wire.
>
> Interesting that it runs on Amps or MilliAmp's.  This should be fun to
> check
> out.  So I should set it around 10 mA +/- 1 mA???
>
> Also if I'm using the O2 when it's being adjusted I should also probably
> make sure I have a good O2 and not an old one that needs to be
> replaced(like
> I have now) to get good readings?
>
> What happens if I unplug the O2 when I'm running?  I remember adjusting my
> old rocco many years ago when we still had Echeck in the state. We
> unplugged
> the O2 and adjusted the settings by ear to pass the Echeck. 8-)
>
> Thanks
> David


-- 
Gordy
MK1 x 4