[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Timing help
I did that all from 100% memory, and didnt pull out a single book.
I figured it get people moving.
On 4/15/07, Dan Bubb <jdbubb@verizon.net> wrote:
>
> INCORRECT Mr. McGarvey!!
> Please see Fig 4-3 on Page 3-13 of the 85 and later Bentley.
> As pointed out by the other two gentlemen that replied the cam timing mark
> lines up with the top of the valve cover flange or more precisely with the
> top of the inner timing belt cover.
>
>
>
> From: "Brian McGarvey" <bmcgarvey@gmail.com>
> To: "Chuck Blue" <sukchew@suddenlink.net>
> Cc: <scirocco-l@scirocco.org>
> Sent: Saturday, April 14, 2007 11:23 PM
> Subject: Re: Timing help
>
>
> > the dot on the inside of the cam gear (IIRC) should line up with the top
> > of
> > the head NOT the valvecover.
>
>
>
>
- References:
- Timing help
- From: lexan_122874 at hotmail.com (Lexan Blanchard)
- Timing help
- From: sukchew at suddenlink.net (Chuck Blue)
- Timing help
- From: bmcgarvey at gmail.com (Brian McGarvey)
- Timing help
- From: jdbubb at verizon.net (Dan Bubb)