(8v) are there different sized injector o-rings (or injector cups)?

[dan.bubb at gmail.com (Dan Bubb)]

Day late and a dollar short.
The cups look like the G60/digifant cups for the solenoid injectors.
They will indeed screw into an early hydraulic head. I have them in my
head for the solenoid type injectors. They would be way too small for
a CIS injector o-ring
Dan

On 10/2/05, Daun Yeagley <vwdaun@yahoo.com> wrote:
>
>
> --- C Boyko <roccit_53@scirocco.cs.uoguelph.ca> wrote:
>
> > > > In my experience striking a flathead screwdriver
> > (nice big one -
> > > > resting on the lip of the injector) with a hammer is
> > the best way ...
>
> Use a little caution with that technique, I snapped an
> injector doing that not long ago.  But yes, shock & awe...
>
>
> Daun Yeagley - Wilmington Ohio
> '81 Scirocco S               '86 Scirocco 8v
> '88 Scirocco 16v             '88 Scirocco Slegato
> '96 Passat GLX Wagon         '56 Cessna 172
> The first rule of intelligent tinkering is to save all the parts - Ehrlich's Law.
>
>
>
>
> ______________________________________________________
> Yahoo! for Good
> Donate to the Hurricane Katrina relief effort.
> http://store.yahoo.com/redcross-donate3/
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>