Crossmember Bars

[scirocco at vintagewatercooleds.com (Eric S)]

*blush*

-- 
Eric
www.vintagewatercooleds.com

1981 Scirocco S (TDI swap project)
1981 Rabbit Truck LX Diesel -FOR SALE-
1990 Corrado TDI -FOR SALE-
1990 Fox Wagon
1991 Cabriolet (2.0 crossflow 8v project)
1994 Jetta GL

C Boyko said:
> If so, you are greatly mistaken, and probably
>> don't understand the depth of my dedication to this group.
>
> Yeah, I do...you make it to Cincy despite the distance, that says
> something.
>>
>> Anyone that has experienced catastrophic crossmember failure
>> understands why this bar was made, and why it has to help.
>>
>> I by no means think this is a CUREALL.    !
>>
>> --
>> Eric
>> www.vintagewatercooleds.com
>
>
> I have one on my car, I had no trouble installing it, and you really can't
> tell it's there. Additional wieght is minimal, and it probably seats the
> front mount deeper into the cup, which can't be a bad thing. I'd been
> wanting something like it for a few years and had actually contacted a
> local race shop to build one, but they were too busy with fast V8 stuff to
> ever get one built. For the power levels on my car, it's likely perfect.
> If
> you're going for 400 WHP, then you should be looking at a completely
> different airframe IMHO, or caging it.
>
> That's my story, and Eric is hot. (Oh, did I say that out loud?)
>
> cathy
>
>