Re: Parts Needed: 16v Wheel Bearing Housings

["Dave Ewing" <rabbit16v@prodigy.net>]

84 on up will work!  Basically anything (A1 of course) that has the bolt on
carriers for the calipers.  They will take 100mm cvs too!

Dave

>   Well, my '80 rocco is being converted to all 16v parts...
> I am prepping the 1.8 16v engine and tranny to be installed as soon as I
> get the engine bay cleaned and painted.  I am planning to use the larger
> 16v axles, but to use these I need the steering knuckle assemblies
> (aka wheel bearing housings)
>   So, if anyone has these available please let me know...
> I need both the left and right sides.
>
> (this is the part that the strut, ball joint, tie-rod,
> and caliper attach to...)
>
> Thanks
>
>
> =====
> Benjamin Harder
> 86 Scirocco 16v
> 80 Scirocco
> 93 Passat GLX
>
> http://www.geocities.com/vwtype53/
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for all of
> your unique holiday gifts! Buy at http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org