Re: Parts Needed: 16v Wheel Bearing Housings

[Dan Bubb <jdbubb@ix.netcom.com>]

The hub carriers on my late 84 would not work with the 100mm CVs.
Dan

Dave Ewing wrote:
> 
> 84 on up will work!  Basically anything (A1 of course) that has the bolt on
> carriers for the calipers.  They will take 100mm cvs too!
> 
> Dave
> 
> >   Well, my '80 rocco is being converted to all 16v parts...
> > I am prepping the 1.8 16v engine and tranny to be installed as soon as I
> > get the engine bay cleaned and painted.  I am planning to use the larger
> > 16v axles, but to use these I need the steering knuckle assemblies
> > (aka wheel bearing housings)
> >   So, if anyone has these available please let me know...
> > I need both the left and right sides.
> >
> > (this is the part that the strut, ball joint, tie-rod,
> > and caliper attach to...)
> >
> > Thanks
> >
> >
> > =====
> > Benjamin Harder
> > 86 Scirocco 16v
> > 80 Scirocco
> > 93 Passat GLX
> >
> > http://www.geocities.com/vwtype53/
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Check out Yahoo! Shopping and Yahoo! Auctions for all of
> > your unique holiday gifts! Buy at http://shopping.yahoo.com
> > or bid at http://auctions.yahoo.com
> >
> > --
> > Email LIST problems to: scirocco-l-probs@scirocco.org.
> > To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
> >
> 
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org