Re: inner cv flanges

[Slink <slink1@jps.net>]

Do you know the best way to go about changing the 100mm flange to a 90mm
flange

Shawn C Meze wrote:

> On Fri, 23 Apr 1999 03:56:26 -0400 Slink <slink1@jps.net> writes:
> >I would like to know if i would have any problems with the inner cv
> >flanges and the flanges on the transaxle I'm putting in. I'm dropping
> >a 2h and putting in a FF transaxle.
> >
> >85 scirocco wolfburg ed.
>
> It will bolt right in.
> You will either need to swap the flanges (the 2H has the 100mm flanges
> and the FF has the 90mm flanges) OR, you can swap or buy new inner CV's
> (90mm) for the FF tranny.
> Either way works.
>
>               Shawn Meze
> 86' Jetta GLi           82' Scirocco GTi
> The Fastest, Quickest, Cleanest and
> best looking Scirocco in all of San Diego!
> http://www.Geocities.com/MotorCity/Speedway/1308/index.htm
>
> ___________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
> or call Juno at (800) 654-JUNO [654-5866]
>
> --
> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> If you experience other problems, email: scirocco-l-probs@scirocco.org




--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org