Re: inner cv flanges

[Shawn C Meze <skerocdriver@juno.com>]

On Fri, 23 Apr 1999 03:56:26 -0400 Slink <slink1@jps.net> writes:
>I would like to know if i would have any problems with the inner cv
>flanges and the flanges on the transaxle I'm putting in. I'm dropping 
>a 2h and putting in a FF transaxle.
>
>85 scirocco wolfburg ed.



It will bolt right in. 
You will either need to swap the flanges (the 2H has the 100mm flanges
and the FF has the 90mm flanges) OR, you can swap or buy new inner CV's
(90mm) for the FF tranny. 
Either way works. 


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org