Re: 16V driveshaft removal

[brett@kodak.com (Brett VanSprewenburg)]

> 
> << It's called an 8mm triple square.  I got mine in a pack of 4 other triple
>  square bits at Pep Boys.  I believe they were marked as brake tools for old
>  GMs and Opels.  Made by Lisle tools, they're about 3-4 inches long and have
>  'flats' machined on the other end where a 13mm socket can fit over so you
>  can turn them.  Incidently, it's the same size as the tool that came with
>  your car for taking the center lug covers off from the stock teardrops.
>  
>  ==Brett >>
> This is where I got mine as well.   Brett forgot to mention that if you get
> this set you'll now also have the correct one to remove the headstuds just in
> case you ever get silly enough to take your head off.  HTH
> Dan May


Strange that you should mention this Dan, as I'm using one of the other ones
from that set TONIGHT to pull a 16v head from a 1.8... :-)

==Brett

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.