Re: Cold Starting

[Joel Leclerc <deejay@info.polymtl.ca>]

I don't have any problem with cold start, even if it's getting cold here!

I had more problem during summer time with warm start, the first start
is fine, but if the engine run enough to get warm and I try to start
after that, then it will take more time to restart.

Look like my problem is the reverse of yours!

Anyone can explain that?

thx
/Joel
8716v

                                   ''''
                                   0  0 
+-----------------------------ooO--(__)--Ooo--------------------------------+
                       VVV  ==fahrvergnugen===  VVV
                       WWW        Volks         WWW

         ---------------- FAHRVERGNUGEN FOREVER! --------------------
              The fact that I need to explain it to you indicates
              that you probably wouldn't understand anyway!
                                .oooO
                                (   )  Oooo.
+--------------------------------\ (---(   )-------------------------------+
http://www.info.polymtl.ca/~deejay\_)   ) /         deejay@info.polymtl.ca
Finger for PGP public key.             (_/          Pager: 851-JOEL
Key fingerprint = 74 87 D1 1A 64 0B E5 7D  D1 C0 22 D9 FD 61 4B C5

On Thu, 5 Nov 1998, Benjamin Harder wrote:

>   It is now getting pretty cold here in Cincinnati, OH.  The morning
> temperatures
> are only in the 30's.  Well, it seems that my 16v doesn't like these cold
> starting
> temperatures.  I am having no trouble at all cranking...and cranking.  The
> engine
> will turn over for about 5 seconds or more before firing.  Then, once it
> fires, the
> engine runs just fine.  I tried replacing the ground cable with a thicker
> wire to see
> if this could help, but it really hasn't helped the cold start.  Does
> anyone with a
> 16v have similar problems?
> 
> 
>   
>                                  
> 
> Benjamin Harder
> 86.5 Scirocco 16v
> http://members.xoom.com/Scirocco16v
> 
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.
> 


--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.