Weekend Plans

[jdbubb at verizon.net (Dan Bubb)]

 I need to finish up a set of 02J brackets which shouldn't take me more than 6 hours and once I get welding you just can't stop me!
After that I'll be lucky to put a clutch cable and speedo cable in my POS 16V.
The 84 turbo might get the residue from a small coolant leak cleaned off of it.

I wouldn't even dream of thinking I could accomplish all the things on your list in one weekend.
Dan

From: "Brian Spinney" <vw_85roccoZ400@hotmail.com>
To: "'Scirocco list'" <Scirocco-l@scirocco.org>
Sent: Friday, March 23, 2007 2:04 PM
Subject: Weekend Plans


> Alright its another Friday here at work and there isn't much going on... So 
> as you can probably guess I'm bored as hell...
> I've been fighting this pretty nasty cold for the better part of this week, 
> (actually this whole week) and hopefully this weekend I can play catch up on 
> the long list of work that needs to be completed to get my car to Cincy 
> 2007...
> 
> So here we go the plans for this weekend...  Starting with my daily driver, 
> which needs some minor work...  I'm still not getting the extra 3-5 miles 
> pre gallon that I use to get...  So I plan on pulling the plugs... and 
> checking the condition of them...  Also going to check the gap because I 
> think I gapped them to tight last time.
> I got to do an oil change which is due in less than 300 miles... and it 
> looks like the snow is done falling, So I want to change my wheels and tires 
> over, and give the car a good old washin...
> 
> Now for all the Scirocco content...
> I'm going to start with the recalibration of my LC-1..  Followed by getting 
> my car fired back up on MS, and setting the ignition timing...  Hopefully 
> all will go well and I won't have to remove the trigger wheel setup...  Once 
> the timing is set and the car is running...  I will be pulling my fuel rail 
> and doing a injector flow test on my 42lbers...  Because they don't seem to 
> be flowing the amount of fuel as they should...
> 
> If my fittings came in for my oil cooler... I will try and get my fan/shroud 
> installed and hook up my new oil cooler lines...   Then the work inside the 
> car will begin since the guy I had coming to weld me some IC piping back 
> out...  I'm disappointed about that.  I'm going to rewire my Autometer 
> gauges.
> 
> Then if time permits I plan on getting some work down on the Bronze 86 
> budget Auto-Xer...
> I need to swap out a working battery, install the new cap, rotor, plugs and 
> plug wires I have sitting around...  Install the wur I picked up so I can 
> fire up the car...
> I will be cleaning up the calipers in hope of doing the brakes sometime new 
> week, since I'm waiting for the pads to come in..  I've got to get some Non 
> AC brackets together so I can remove the A/C from the car...
> 
> -Brian
> 85 Scirocco 8vT       01 Jetta 20vT       84 Rabbit GTI
> 86 Bronze Scirocco 8v 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>