[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Clutch Pressure Plate Q



Woo hoo!  I want a video or audio file of that puppy firing up soon!

Joe

-----Original Message-----
From: Mtl-Marc [mailto:marc_scirocco@xxxxxxxxxxxx] 
Sent: Thursday, June 28, 2007 6:03 PM
To: 'Dan Bubb'
Cc: scirocco-l@xxxxxxxxxxxx
Subject: RE: Clutch Pressure Plate Q

Done! Thanks for the info Dan!

The motor is in the car now :-)

Cheers.

Marc

> -----Message d'origine-----
> De : Dan Bubb [mailto:jdbubb@xxxxxxxxxxx] 
> 
> The big washer, ~75mm in diameter, with a center hole and 6 
> unevenly spaced holes??
> That goes between the pressure plate and the bolts that hold 
> it to the crank.
> 
> 
> >> >
> >> >  On 6/27/07, Mtl-Marc <marc_scirocco@xxxxxxxxxxxx> wrote:
> >> >
> >> >      Trying to get the clutch assy installed, I have a 
> shim,  and I 
> >> > do not
> >> >      remember where goes that shim...
> >> >
> >> >      Between the crankshaft and the pressure plate
> >> >
> >> >      Or
> >> >
> >> >      As a big whasher between the pressure plate and the 
> 6  bolts 
> >> > to the crank?
> >> >
> >> >      Anyone done this recently?
> >> >
> >> >      Bentley and Haynes are useless on this. Assembly is 
>  reverse 
> >> > of removal...
> >> >
> >> >      ... And I did not write it down when I took it apart.
> >> >
> >> >      Thanks
> >> >
> >> >      Marc
> >> >


_______________________________________________
Scirocco-l mailing list
Scirocco-l@xxxxxxxxxxxx
http://neubayern.net/mailman/listinfo/scirocco-l

DISCLAIMER: This message contains information which may be confidential and/or privileged, and is intended only for the use of the addressee(s). Any use, disclosure or copying of this message or any part thereof by any person other than such addressee(s) is unauthorized and strictly prohibited. If you have received this message in error, please notify the sender by return e-mail and delete the message. Thank you for your cooperation.