Clutch Pressure Plate Q

[marc_scirocco at sympatico.ca (Mtl-Marc)]

Done! Thanks for the info Dan!

The motor is in the car now :-)

Cheers.

Marc

> -----Message d'origine-----
> De : Dan Bubb [mailto:jdbubb@xxxxxxxxxxx] 
> 
> The big washer, ~75mm in diameter, with a center hole and 6 
> unevenly spaced holes??
> That goes between the pressure plate and the bolts that hold 
> it to the crank.
> 
> 
> >> >
> >> >  On 6/27/07, Mtl-Marc <marc_scirocco@xxxxxxxxxxxx> wrote:
> >> >
> >> >      Trying to get the clutch assy installed, I have a 
> shim,  and I 
> >> > do not
> >> >      remember where goes that shim...
> >> >
> >> >      Between the crankshaft and the pressure plate
> >> >
> >> >      Or
> >> >
> >> >      As a big whasher between the pressure plate and the 
> 6  bolts 
> >> > to the crank?
> >> >
> >> >      Anyone done this recently?
> >> >
> >> >      Bentley and Haynes are useless on this. Assembly is 
>  reverse 
> >> > of removal...
> >> >
> >> >      ... And I did not write it down when I took it apart.
> >> >
> >> >      Thanks
> >> >
> >> >      Marc
> >> >