[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Clutch Pressure Plate Q
The big washer, ~75mm in diameter, with a center hole and 6 unevenly spaced holes??
That goes between the pressure plate and the bolts that hold it to the crank.
>> >
>> > On 6/27/07, Mtl-Marc <marc_scirocco@xxxxxxxxxxxx> wrote:
>> >
>> > Trying to get the clutch assy installed, I have a shim,
>> > and I do not
>> > remember where goes that shim...
>> >
>> > Between the crankshaft and the pressure plate
>> >
>> > Or
>> >
>> > As a big whasher between the pressure plate and the 6
>> > bolts to the crank?
>> >
>> > Anyone done this recently?
>> >
>> > Bentley and Haynes are useless on this. Assembly is
>> > reverse of removal...
>> >
>> > ... And I did not write it down when I took it apart.
>> >
>> > Thanks
>> >
>> > Marc
>> >
>> >
>> > _______________________________________________
>> > Scirocco-l mailing list
>> > Scirocco-l@xxxxxxxxxxxx
>> > http://neubayern.net/mailman/listinfo/scirocco-l
>> >
>> >
>> >
>> >
>> >
>> > --
>> > 80 Scirocco Callaway Indiana Red
>> > 87 Scirocco 16v Tornado Red
>> > 04 R32 Reflex Silver
>> >
>>
>>
>> _______________________________________________
>> Scirocco-l mailing list
>> Scirocco-l@xxxxxxxxxxxx
>> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>