megasquirt Q's

[bmcgarvey at gmail.com (Brian McGarvey)]

biggest problem with touchsreens is temp variations that in car temps see.


On 4/11/07, Chris Bennett <scirocco16vr32@gmail.com> wrote:
>
> Thats a thought... touchscreen megasquirt.  I don't think Crestron
> knows or cares what it's sending RS232 commands to.  Hmmm
>
>
>
> On 4/11/07, Chris Bennett <scirocco16vr32@gmail.com> wrote:
> > This is humorous for me to follow as it is very similar to setting up
> > a lighting system... LOL
> >
> > Sorry not laughing at you I do similar things all the time.
> >
> > Good luck.  If you need help with RS232 strings to a crestron system I
> > am your man.
> >
> >
> >
> > On 4/11/07, Dan Bubb <jdbubb@verizon.net> wrote:
> > > First off you should have Megatune 2.25.
> > > Once you get a connections open a terminal program, power up the
> Megasquirt and type Q and it should spit out a firmeware version number.
> > > Then you should open the Configurator. You can do this from
> Megatune>File>Configurator.
> > > Expand Megatune2.25, highlight the firmware version you have, then
> click File>Activate.
> > > Also, set your Code Variant under Car1>settings.ini>Settings>Code
> Variant. Also set your Lambda sensor.
> > >
> > > If the car is currently running MS I and you have a WB-O2 it would be
> a good step up to convert to MSnS-E simply because it has an AFR target
> table and it will autotune.
> > >
> > > If you don't have Megalogviewer you should download it here:
> > > http://www.ideasandsolutions.biz/MegaLogViewer/download/
> > >
> > > Dan
> > >
> > > From: <julie@menloparkrandd.com>
> > > To: "Dan Bubb" <jdbubb@verizon.net>; <julie@menloparkrandd.com>; "A
> Org, Scirocco" <scirocco-l@scirocco.org>
> > > Sent: Wednesday, April 11, 2007 5:52 AM
> > > Subject: Re: megasquirt Q's
> > >
> > >
> > > > >I'm not sure what the question is.
> > > >>Put in anywhere you want, start Megatune, click "file", then "open"
> and pick
> > > >>the msq.
> > > > Ok. I got that far last night. I cant run the code as I have no
> RS232 port on the lap top. I am waiting for the USB/Serial adapters to
> arrive so I can connect.
> > > >>Note: the msq file needs to match the firmware. MS I, MSnS-E, and
> the
> > > >>version number.
> > > > This is the one Ron used to load the MS in the first place. It says
> the processor is wrong, but then its not connected to the system. Again,
> waiting for the adapters....
> > > >
> > > >>As far as cold start:
> > > >>If it's not firing right off then it's probably the cranking pulse
> width.
> > > >>If it fires but doesn't stay running then adjust ASE or warmup
> enrichment.
> > > > I spent last night and the night before reading the MegaManual.
> (phew...). Thats a lot to absorb and not all the concepts I understand yet.
> > > >
> > > >>
> > > >>
> > > >>
> > > >>From: <julie@menloparkrandd.com>
> > > >>To: "A Org, Scirocco" <scirocco-l@scirocco.org>
> > > >>Sent: Tuesday, April 10, 2007 7:05 PM
> > > >>Subject: megasquirt Q's
> > > >>
> > > >>
> > > >>>I have a MSQ file, but not sure where it goes.
> > > >>>
> > > >>> As a note. If interested in Cold Start for MS, dont call a Texan.
> Just a
> > > >>> heads up :)
> > > >>>
> > > >>> _______________________________________________
> > > >>> Scirocco-l mailing list
> > > >>> Scirocco-l@scirocco.org
> > > >>> http://neubayern.net/mailman/listinfo/scirocco-l
> > > >>>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> >
> > --
> > 80 Scirocco Callaway Indiana Red
> > 87 Scirocco 16v Tornado Red
> > 04 R32 Reflex Silver
> >
>
>
> --
> 80 Scirocco Callaway Indiana Red
> 87 Scirocco 16v Tornado Red
> 04 R32 Reflex Silver
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>