megasquirt Q's

[julie at menloparkrandd.com (julie@menloparkrandd.com)]

>I'm not sure what the question is.
>Put in anywhere you want, start Megatune, click "file", then "open" and pick 
>the msq.
Ok. I got that far last night. I cant run the code as I have no RS232 port on the lap top. I am waiting for the USB/Serial adapters to arrive so I can connect.
>Note: the msq file needs to match the firmware. MS I, MSnS-E, and the 
>version number.
This is the one Ron used to load the MS in the first place. It says the processor is wrong, but then its not connected to the system. Again, waiting for the adapters....

>As far as cold start:
>If it's not firing right off then it's probably the cranking pulse width.
>If it fires but doesn't stay running then adjust ASE or warmup enrichment.
I spent last night and the night before reading the MegaManual. (phew...). Thats a lot to absorb and not all the concepts I understand yet.

>
>
>
>From: <julie@menloparkrandd.com>
>To: "A Org, Scirocco" <scirocco-l@scirocco.org>
>Sent: Tuesday, April 10, 2007 7:05 PM
>Subject: megasquirt Q's
>
>
>>I have a MSQ file, but not sure where it goes.
>>
>> As a note. If interested in Cold Start for MS, dont call a Texan. Just a 
>> heads up :)
>>
>> _______________________________________________
>> Scirocco-l mailing list
>> Scirocco-l@scirocco.org
>> http://neubayern.net/mailman/listinfo/scirocco-l
>> 
>
>
>
>