[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

megasquirt Q's



First off you should have Megatune 2.25.
Once you get a connections open a terminal program, power up the Megasquirt and type Q and it should spit out a firmeware version number.
Then you should open the Configurator. You can do this from Megatune>File>Configurator.
Expand Megatune2.25, highlight the firmware version you have, then click File>Activate.
Also, set your Code Variant under Car1>settings.ini>Settings>Code Variant. Also set your Lambda sensor.

If the car is currently running MS I and you have a WB-O2 it would be a good step up to convert to MSnS-E simply because it has an AFR target table and it will autotune.

If you don't have Megalogviewer you should download it here:
http://www.ideasandsolutions.biz/MegaLogViewer/download/

Dan

From: <julie@menloparkrandd.com>
To: "Dan Bubb" <jdbubb@verizon.net>; <julie@menloparkrandd.com>; "A Org, Scirocco" <scirocco-l@scirocco.org>
Sent: Wednesday, April 11, 2007 5:52 AM
Subject: Re: megasquirt Q's


> >I'm not sure what the question is.
>>Put in anywhere you want, start Megatune, click "file", then "open" and pick 
>>the msq.
> Ok. I got that far last night. I cant run the code as I have no RS232 port on the lap top. I am waiting for the USB/Serial adapters to arrive so I can connect.
>>Note: the msq file needs to match the firmware. MS I, MSnS-E, and the 
>>version number.
> This is the one Ron used to load the MS in the first place. It says the processor is wrong, but then its not connected to the system. Again, waiting for the adapters....
> 
>>As far as cold start:
>>If it's not firing right off then it's probably the cranking pulse width.
>>If it fires but doesn't stay running then adjust ASE or warmup enrichment.
> I spent last night and the night before reading the MegaManual. (phew...). Thats a lot to absorb and not all the concepts I understand yet.
> 
>>
>>
>>
>>From: <julie@menloparkrandd.com>
>>To: "A Org, Scirocco" <scirocco-l@scirocco.org>
>>Sent: Tuesday, April 10, 2007 7:05 PM
>>Subject: megasquirt Q's
>>
>>
>>>I have a MSQ file, but not sure where it goes.
>>>
>>> As a note. If interested in Cold Start for MS, dont call a Texan. Just a 
>>> heads up :)
>>>
>>> _______________________________________________
>>> Scirocco-l mailing list
>>> Scirocco-l@scirocco.org
>>> http://neubayern.net/mailman/listinfo/scirocco-l
>>> 
>>
>>
>>
>>
> 
>