front suspension bolt size

[koabi.brooks at gmail.com (Koabi Brooks)]

length is 60mm

On 4/2/07, Koabi Brooks <koabi.brooks@gmail.com> wrote:
>
> Yeah I am not thrilled with that design - the factory camber adjustment
> solution is nice and precise and easy to set how it was previously should
> you take apart the suspension.  Your fastener company is too far away :p
>
> On 4/2/07, Dan Bubb <jdbubb@verizon.net> wrote:
> >
> > Ah! Of course. Pain in the ass setting camber with the H & R's though!
> > Been there, hated it!
> > May I recommend www.mcmaster.com for your high grade bolts?
> > Dan
> >
> >
> > From: "Koabi Brooks" <koabi.brooks@gmail.com>
> > To: "Dan Bubb" <jdbubb@verizon.net>
> > Cc: < Scirocco-l@scirocco.org>
> > Sent: Monday, April 02, 2007 10:17 AM
> > Subject: Re: front suspension bolt size
> >
> >
> > > The services of the eccentric bolt are no longer required so the plan
> > is to
> > > get 4 high grade bolts to replace everything.  The h&r coilover dont
> > use the
> > > eccentric - it's just an oval opening for the top bolt and you slide
> > it into
> > > position then just clamp it down.  The existing hardware is fine but
> > it
> > > looks bad on the new suspension :)
> > >
> > > On 4/2/07, Dan Bubb <jdbubb@verizon.net> wrote:
> > >>
> > >> The M12 X 1.5 indicates a 12mm diameter and a thread pitch of 1.5mm
> > i.e.
> > >> peak to peak on the thread is 1.5mm.
> > >> There is no length indicated in ETKA for these bolts.
> > >> I'd think this is a good location to use the factory hardware and a
> > good
> > >> opportunity to buy new eccentric bolts and washers at the same time.
> > >> my .02
> > >> Dan
> > >>
> > >> From: "Gordy Stedman" <ydrogs@gmail.com>
> > >> To: "Koabi Brooks" < koabi.brooks@gmail.com>; <
> > Scirocco-l@scirocco.org>
> > >> Sent: Monday, April 02, 2007 2:12 AM
> > >> Subject: Re: front suspension bolt size
> > >>
> > >>
> > >> > It is the same nut size for both so it would be the same shank and
> > >> threads
> > >> > for both bolts and I know they use a 17mm wrench.  I do not know
> > much
> > >> about
> > >> > bolts and nut sizes, but to quote ETKA on the nut "m12x1,5".  I
> > forgot
> > >> the
> > >> > ,5 last time although it probable does not help any.  I know it
> > means
> > >> > nothing to me.
> > >> >
> > >> > On 4/1/07, Koabi Brooks <koabi.brooks@gmail.com> wrote:
> > >> >>
> > >> >> Yeah i don't know what the eccentric size is though :)
> > >> >>
> > >> >> m12x1?  what the heck is x1?
> > >> >>
> > >> >
> > >> > --
> > >> > Gordy
> > >> > MK1 x 5
> > >> > _______________________________________________
> > >> > Scirocco-l mailing list
> > >> > Scirocco-l@scirocco.org
> > >> > http://neubayern.net/mailman/listinfo/scirocco-l
> > >> >
> > >>
> > >>
> > >
> >
> >
>