Poly control arm bushings

[doubt at inwave.com (Nate Mellom)]

<http://www.parts4vws.com/catalog/product_detail.asp?PartNumber=22%2D201>
I think I see what you're saying, the fronts are 2 part, the rears one 
piece.  I've been doing some research, should they be lubed before 
installation?
Nate


marc_scirocco wrote:
> The front A-Arms poly bushings are two pieces design. You just lube them,
> and slide them from both sides. Once you can eyeball your poly bushings,
> you'll figure what I am trying to explain here... ;-)
> 
> Cheers.
> 
> Marc
> 
> 
>>I'm getting my Total Poly kit from the Potter peeps tomorrow, 
>>and I plan on installing most of it this weekend, including 
>>the control arm bushings.  I might have access to a press if 
>>need be, but can I install them with a C clamp? Any other tips?
>>Thanks!
>>Nate
>>
>>
> 
> 
> 
>