Poly control arm bushings

[rogercv1 at gmail.com (Roger concha)]

they come with a little tube of lube
makes it much easier to slide in.
I put in the from poly bushings about a month ago

 On 5/26/05, Nate Mellom <doubt@inwave.com> wrote: 
> 
> <http://www.parts4vws.com/catalog/product_detail.asp?PartNumber=22%2D201>
> I think I see what you're saying, the fronts are 2 part, the rears one
> piece. I've been doing some research, should they be lubed before
> installation?
> Nate
> 
> 
> marc_scirocco wrote:
> > The front A-Arms poly bushings are two pieces design. You just lube 
> them,
> > and slide them from both sides. Once you can eyeball your poly bushings,
> > you'll figure what I am trying to explain here... ;-)
> >
> > Cheers.
> >
> > Marc
> >
> >
> >>I'm getting my Total Poly kit from the Potter peeps tomorrow,
> >>and I plan on installing most of it this weekend, including
> >>the control arm bushings. I might have access to a press if
> >>need be, but can I install them with a C clamp? Any other tips?
> >>Thanks!
> >>Nate
> >>
> >>
> >
> >
> >
> >
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>