Control arm bushing q's

[mr.utility at highstream.net (David Utley)]

You sure you want to go poly?  

  They are cheaper, but they are a lot harder...  A1 chassis is a lot more 
likely to transmit noise/harshness to the cabin than the B1 would be...

Go with what makes you happy, I just thought I would throw that out there...

David Utley

Quoting "doubt@inwave.com" <doubt@inwave.com>:

> All,
> My '81 started making horrible vibrations/rattles/bounces/jounces, etc. the
> other day, and judging by what I learned with my Quantum I need to replace
> the control arm bushings.  I found a set on Potterman's site (poly, both
> sides for $28, not bad!), I just have to order them and install them.  Any
> tips/tricks/precautions would be greatly appreciated.  I did my Syncro's
> front bushings, so I sorta know what I'm getting into, but A1  and B2 chassis
> aren't exactly twins.
> Thanks!
> Nate
> '81 Roc
> '87 QSW
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 



David Utley
-----------
Cable Volkswagen
405-470-3129
1-800-522-6793