rear wiper motor and front washer wiring gremlins

[jlagnese at massed.net (John Lagnese)]

1) I'd pull the wire off the pump and see if it still blows the fuse first!
2) Clean the pump connections and then pull the wheel and clean those
contacts.
----- Original Message -----
From: "Ryan Ruggles" <ryanruggles@uniserve.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, May 23, 2003 1:38 PM
Subject: rear wiper motor and front washer wiring gremlins


> 1)    I have been trying to get my rear wiper to work but every time I put
a
> fuse in it pops when I turn on hte ignition, and pretty violently too.
> SHould I just run new wires to it or is this a pretty common problem with
an
> "easy fix"?
>
>
> 2)    Also I have been trying to get my front window washing pump to work.
> It only works once every like 20 times or so.  It seems to be getting
power
> but maybe weaker than 12v.  I know the pump works because it was working
in
> the rear.
>
> Cheers
>
> R.
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l