[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Valve springs and install




T Berk wrote:
> 
> Kervin wrote:
> >
> > I have a 8v hydro head that I would like to put a higher lift cam in.
> > I've never replaced those before.  Any helpful tools that I'll need?
> > I've also seen the on going remarks about not buying springs from
> > TTTuning.  Anyone got springs from them lately?  What's another good
> > source?  Thanks
> > --
> > Kervin
> 
> I don't think you have any springs in a Hydro head.
> 
> TBerk

Sure I do!  The hydraulic part just takes the place of the shims on a
solid head.  The springs are below the lifters.
-- 
Kervin
86 Scirocco 2.0 8v 4K+80% and lots of other numbers and letters
88 Gti 1.8 16v Not done and now it's winter :(
00 tt600