Serpetine Belts

["TBerk " at sbcglobal.net (T Berk)]

Brett VanSprewenburg wrote:
> 
> >its been done to a 16V,  do a search on vwvortex for it.  I had alot of info
> >for it but i have since reformatted.  You will need the pulleys from an ABA
> >and diff alt bracket maybe.  after all done you will still have one v belt.
> >
> >Rober Piwonka
> 
> Not only has it been done, but done by the factory no less.  The non-USA
> A3 2L 16v (engine code ABF I believe) came with such a system.  Look it
> up in the ETKA for the necessary parts.  There's a red rabbit 16v that was
> at last years WF that had this conversion.
> 
> ==Brett
> 


As do the 20v motors, I don't have room on the HD for ETKA at the moment
so I am deficient in actual motor codes but I can forward a picture if
so desired.


TBerk