Fw: clutch questions revisited (still grinding/scraping)

[volks.wagen@verizon.net (Mr Neubold)]

----- Original Message -----
From: "Mr Neubold" <volks.wagen@verizon.net>
To: "rhys" <sik8v@netscape.net>
Sent: Sunday, November 03, 2002 3:51 PM
Subject: Re: clutch questions revisited (still grinding/scraping)


> I just replaced my clutch and the metal cover that goes over the fingers
on
> the pressure plate was broken so it was sittign sideways, the pushrod was
> off center and grinding to the plate, made a hell of a noise not to
mention
> that the clutch would not disengage
> ----- Original Message -----
> From: "rhys" <sik8v@netscape.net>
> To: "rocco list" <scirocco-l@scirocco.org>
> Sent: Sunday, November 03, 2002 12:50 PM
> Subject: RE: clutch questions revisited (still grinding/scraping)
>
>
> > lemme try this again.
> >
> > so today i finally got my release bearing replaced...noise is still
> > there. it is a grinding/scraping noise that people said was most likely
> > my release bearing. well, it wasnt and i still need to fix it  :(  i
> > think someone said it was possible the clutch pushrod. according to the
> > bentley thats not a fun looking procedure.
> >
> > oh well, at least it looks like i needed to replace the bearing anyways,
> > it was on its way, and there were a few small metal shavings in the
case.
> >
> > what else could this noise be?? and how intensive of a fix is it?
> >
> > thanks,
> > rhys
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>