Stock 16v lower stress bar

[pbureau@attbi.com (ATS - Patrick Bureau)]

the 16v lower stress bar is good to prevent the usuall 8v a-arm pillar
chassi cracks.
easy enough to install, 2 front a-arm bolts. and 2 chassi bolts..

Patrick (whom had to repair is 8v chassi at 900$ cost and 200$ Eurosport Sub
race frame)


=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Larry
=>Sent: Saturday, March 16, 2002 5:34 PM
=>To: johnny.erk@sympatico.ca; scirocco list
=>Subject: Re: Stock 16v lower stress bar
=>
=>
=>John-
=>Easy enough to install.  If you can change oil without stripping threads,
=>you can install the bar.
=>Sufficient?  Well, your '85 was 'sufficient' without the bar.
=>One the other
=>hand, some guys won't be satified until there's a small iron(or titanium)
=>bridge down there.  Different people have different definitions of
=>'sufficient'.
=>All that said, your stock 16V bar will serve you nicely on the
=>street and is
=>a good value.
=>
=>Larry   sandiego16V
=>
=>> I'm considering getting a  stock 16v lower stress bar from a friend(for
=>> a good price) for my 85 8v. Is it sufficient, or should I save up for an
=>> Autotech or Eurosport? It's only for street use. How hard is it to
=>> install?
=>> John
=>
=>
=>----------------------------------------------------
=>Sign Up for NetZero Platinum Today
=>Only $9.95 per month!
=>http://my.netzero.net/s/signup?r=platinum&refcd=PT97
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l