help! pass side motor mount

[amalventano1@comcast.net (Allyn)]

Get a 'mini-sledge', slightly tighten the bolt back to where it was, pound on the bead of the bolt
(the one that turns, not the welded-on nut). The idea is that the sleeve is against the nut-backed
part of the frame mount bracket. You are trying to pound it and agitate it to break it free. If all
else fails throw an impact on the sucker and let it spin. It will eventually push hard enough on the
nut to force the sleeve to stay put as the bolt backs out.
Al

----- Original Message -----
From: "fryer" <alienj@bad-candy.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, March 15, 2002 4:51 PM
Subject: help! pass side motor mount


> alright, so first warm day ive been home i decide to do my mounts
> on my 8v rocco, simple, i got a press and a jack and some wood,
> easy right? i can not get that bolt out of the middle of the
> mount, so the mount tore and is just spinning in the bracket, i
> tried a punch and i tried jamming a prybar into the mount to push
> towards the bolt head, i dont know what to do now.
> also is there a way to get the lower belt cover off without taking
> all the belts off?
> thanks
> chris fryer
> pita 85 8v scirocco wolfsburg
> 87 vanagon syncro
>
> ________________________________________________________________
> Get your own evilemail.com address at http://www.evilemail.com
>
>
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l