help! pass side motor mount

[roclist@accessconsulting.ca (Jason Adams)]

Happened to me as well, lots of heat, penetrating oil, big hammer, oh did I
mention a fire extinguisher (just in case...)

heat the bastard up lots of it, penetrating oil, whack the head of the bolt
on axis many times...

took me about an hour and a half but it finally worked, I reused the bolt
too...

Jason Adams
Fahrvergnugen Forever!


----- Original Message -----
From: "fryer" <alienj@bad-candy.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, March 15, 2002 1:51 PM
Subject: help! pass side motor mount


> alright, so first warm day ive been home i decide to do my mounts
> on my 8v rocco, simple, i got a press and a jack and some wood,
> easy right? i can not get that bolt out of the middle of the
> mount, so the mount tore and is just spinning in the bracket, i
> tried a punch and i tried jamming a prybar into the mount to push
> towards the bolt head, i dont know what to do now.
> also is there a way to get the lower belt cover off without taking
> all the belts off?
> thanks
> chris fryer
> pita 85 8v scirocco wolfsburg
> 87 vanagon syncro
>
> ________________________________________________________________
> Get your own evilemail.com address at http://www.evilemail.com
>
>
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>