series resister replacement?

[ralexander03@snet.net (Rick Alexander)]

You are going about this the hard way. Access the fan motor from above under
the black plastic hood in the rain tray. It's easy from the right direction.
By the way those wires are short and go to a plug and do not come off the
resistor pack.

Rick Alexander
http://www.brubakerbox.com
http://clubs.hemmings.com/hams/
http://clubs.hemmings.com/vwsrus/

----- Original Message -----
From: "Michael Abatzis" <abatzis2@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, August 13, 2002 7:16 PM
Subject: series resister replacement?


> blower motor only works on speeds 2 and 3.  replaced the switch, no luck.
> figure it's the resistor. went to pull it from the parts car. 2 problems:
> 1. how do the wires come off the damn thing? they look like spade
> connectors, but they weren't coming off. couldn't get a good look, and
> didn't want to break anything.
> 2. easy enough to get to in the parts car without an interior/dash, but is
> this as big as a pita as it looks like with carpeting, dash, etc still in
> place?
> tia,
> -michael
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>