Re: wheel bearing question

["Foxx (in a box)" <foxxinabox@copper.net>]

> the hub then?  I guess I could bring it to a shop tomorrow and see if they
> will pull it, or buy new hubs, (but I was hoping to save a few bucks).  I
> can't find a bearing puller type tool that will work at any Autozone or
> Advance auto either.

  air chisel is what i used (at a shop). you might try a brass drift and
a vice. or you could mostly cut through it with a dremel and break it
off. good luck.

-- 
 /\_/\	  Foxx (in a box)
< o o >	  http://foxx.tripod.com
  \ /
   °

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org