Re: Porsche 944T Master Cylinder on 81 Scirocco MS for 16V brakes.

[Mash <type53@yahoo.com>]

> > Ya'all been wondering why I am posting so often
> now????
> > Ok, I have recently been laid off.

=======================
that bites . . .

> >
> > I have test fit a 944 Porsche Turbo MS to the
> stock 81 Scirocco booster
> and
> > it is a direct fit.

big question: how will the internal piston line up
(compare) with the amount of travel in the stock MC?

(will the pedal litterally be "to the metal"?)

> > This MS is 23mm for front and 20mm for rear.
> > 2 line outputs for the front and 1 line output for
> the rear.
> > I hope to run the single line through the firewall
> to the E-brake location
> > and mount a Tilton adj. proportioning valve (one
> line in, two line out),
> and
> > then run the dual lines back to the rear calipers.
> > This MS compared to the 81 Scirocco MS which is
> 20mm for both.
> > I am going to try this MS with my 16V brakes
> (currently running stock
> > MS/Booster with 10.1/8.9 with pedal to the floor).
> >
> > I'll let ya'll know how this turns out in a future
> episode of the Young
> and
> > the Restless......OOps, damn TV......

Sounds wild, please let us know one way or the other .
. .



=====
Mark Peele
1985 Scirocco, 1982 Scirocco, 1981 Scirocco, 1978 Scirocco, 1987 Golf GT
http://www.scirocco2.de/mark.htm
Direct Mail: SCIROCCO_GTX@YAHOO.COM
Need parts? try http://www.parts4vws.com/ (Potterman)
or http://www.germanautoparts.com/ (Adirondack)
or http://thescirocco.com

__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org