RE: 16V transaxles, was Re: now: torque is good - was Re: 50 mm vs 40 mm intake

["Scott Williams" <sfwilliams@home.com>]

> As I understand, the 2H does not accept 100mm CV joints at the output
> flange. Is this not true?

Drop that 2H in your Scirocco 16v and be done with it. The flanges are the
same 100mm in both the 4K *and* the 2H. The only bad thing about the 2H is
that you can't shim it. If you're installing a Quaife or don't care about
the mini slip then you're good to go. The superior thing about the 2H is the
lower gearing verses the 4K. That difference (3.94 verses 3.89) is small but
noticeable. The 5th gear will probably drive you nuts, though. Throw a .75
5th gear in there and yer chillin'...
______________________________
Scott F. Williams
Account Manager
GENUiTY - Eastern Region
1 Liberty Plaza, 20th Floor
New York, NY 10006
Voice: 212. 416.1745
Fax: 212.416.1702
scott.williams@genuity.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org