got the 9a this AM

[<jester@westfailure.net>]

okay, pulled the 9a and all of the motronic stuff left...

Someone had been through and stripped a little bit, but i think i can
find what its missing. Whomever was there, knew which bits to get
unfortunately :(

whats missing:

dizzy (my 1.8 will have that)
fuel lines (again, i'll use the 1.8's anyway)
injectors (bummer, can you use jetronic CIS injectors with motronic CIS?)
ISV (i think this is different, cann a jetronic or digifunk one be used?)
cold start injector (again, what will work here?)
ignition wires (i gather i'll need to source that 4'th wire sensor??)

also, i didnt pull the fuel pump and accumulator, will the jetronic ones
work?

But, i got the knock sensors, complete harness, the fuel distributor,
coil, etc. etc. etc. if i didnt list it as missing it was there :)

On the injectors, i'm thinking of figuring out what Jetronic injectors
have the same flow rate as the motronic guys, then i dont even need an
adapter for the fuel lines??? Since their both still CIS as long as the
flow rate and resistance are compatible, i should be okay there??

there are like a billion audis/volvos/saabs/beemers in the yards around
here i should be able to find something that'll work... this was the first
motronic 16v i'd ever run into though... at least in a yard with
reasonable prices.

take care,

Steve

***************************************************************************
             Fashion Twins, activate! form of: a lemming.          
                      http://westfailure.org
*************************************************************************** 


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org