[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Shifter rod problems-Help!



Danny,
Here are the measurements I got from the ones I removed to install my
spherical rod end system.

Long rod (with slight bend in it):
6.772" or 172mm
Short rods (have one of each, don't remember which came off the Scirocco,
one might be for 4sp, A2??):
3.937" or 100mm
4.409" or 112mm

HTH

Randy


> Really sucks when you DON'T (yet) own a Scirocco-- but realize that the
> Scirocco mailing list is probably the best qualified to answer the tech
> questions...
>
> I lost the exact settings for one of my TSR linkage links, and need to get
an
> exact center to center distance for the short rod on the tranny (VW # 171
711
> 574 B) The measurement I have is 3 15/16" but I don't have a stock linkage
> piece to verify if that is correct.
>
> Having a hell of a time getting the tranny in reverse, hoping for a
"simple"
> linkage adjustment- I've had no problems in the past dialing the stop
finger
> to gate distance at 15mm...
>
> Thanks, and Happy Holidays to everyone on my favorite A1 "Tech Group"...
>
> Danny
> 81 Caddy 2.0 16V - with many Scirocco parts.....
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org