Re: Shifter rod problems-Help!

[Jeremy Salda <roccoguy@mac.com>]

I've never measured any adjustment when putting my linkages back 
together. I've always just done the old trial-and-error method. Usually 
get it within 2 or 3 tries. Just pay attention to what you move and in 
what direction. Then notice how it affects the gears engaging. Use a 
notepad if you have to.

jeremy


On Saturday, December 1, 2001, at 04:32 , BFDEIHL@aol.com wrote:

> Really sucks when you DON'T (yet) own a Scirocco-- but realize that the
> Scirocco mailing list is probably the best qualified to answer the tech
> questions...
>
> I lost the exact settings for one of my TSR linkage links, and need to 
> get an
> exact center to center distance for the short rod on the tranny (VW # 
> 171 711
> 574 B) The measurement I have is 3 15/16" but I don't have a stock 
> linkage
> piece to verify if that is correct.
>
> Having a hell of a time getting the tranny in reverse, hoping for a 
> "simple"
> linkage adjustment- I've had no problems in the past dialing the stop 
> finger
> to gate distance at 15mm...
>
> Thanks, and Happy Holidays to everyone on my favorite A1 "Tech Group"...
>
> Danny
> 81 Caddy 2.0 16V - with many Scirocco parts.....
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to 
> majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org