RE: Stripe Eliminator

["Patrick Bureau" <pbureau@home.com>]

Now I know that feeling... I used a good old razor blade, and took most of
the paint with it,
the trick is to manage the blade t only take into the clear coat of the
paint.. it peels right off, fsk the paint job on the pillar mind you but I
did not care.. got the car repainted.

    ___ __________
   / _ /_  __/ __/  A Texan's Scirocco, 1985 8v
  / __ |/ / _\ \    http://longcoeur.com/scirocco/
 /_/ |_/_/ /___/    (AIM) patricdlc, (ICQ) 3291816


-----Original Message-----
From: owner-scirocco-l@scirocco.org
[mailto:owner-scirocco-l@scirocco.org]On Behalf Of Jeffrey Lowe
Sent: Thursday, August 23, 2001 1:53 PM
To: George, Mandy; scirocco-L
Subject: Re: Stripe Eliminator


I tried Goo Gone, 3M adhesive remover, 3M Woodgrain &
Molding remover, a heat gun, and various razors &
scrapers, none of these did the trick. The problem is
that after 15 years of being baked on by the Texas sun
a sticker becomes almost one with the paint.

--- "George, Mandy" <neonrt@PowerLink.net> wrote:
> I would imagine that something like "goofoff"(sold
> at home depot and others like them),
> would do a good job.  I recently used this stuff to
> remove the old double sided tape on
> one of my truck's fender flares; couldn't find
> anything else to pull off the adhesive either.
>
> John

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org