Re: clutch replacement

[John Lagnese <jlagnese@cybertours.com>]

Haynes beats the crap out a Chilton's!

DNK006@aol.com wrote:

> Bently!  or if you are too cheap for that (like me) you can get a Chiltons
> for $20, or a Hayes for $12.99.
> You need a manual for a clutch job if you havn't done one before.  You will
> also need that 8mm 12pt triple square tool, a 30mm socket, picklefork,
> support for the tranny (2x4 with chain), 9mm 12pt socket, and a few other
> things.  Good Luck, and remember to take off the little bellhousing cover on
> the rear pass. side!!!  I forgot this once, and it took me forever to figure
> out why it won't come out!
>
> Ben
> 86 8v
> 84 8v
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org