Re: clutch replacement

["Jason" <jason87vw@nac.net>]

Don't forget the holy water, chewing game, six pack of Lowenbrau and a
paperclip..."MCGYVER" :-0

----- Original Message -----
From: <DNK006@aol.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, September 05, 2000 10:48 PM
Subject: Re: clutch replacement


> Bently!  or if you are too cheap for that (like me) you can get a Chiltons
> for $20, or a Hayes for $12.99.
> You need a manual for a clutch job if you havn't done one before.  You
will
> also need that 8mm 12pt triple square tool, a 30mm socket, picklefork,
> support for the tranny (2x4 with chain), 9mm 12pt socket, and a few other
> things.  Good Luck, and remember to take off the little bellhousing cover
on
> the rear pass. side!!!  I forgot this once, and it took me forever to
figure
> out why it won't come out!
>
> Ben
> 86 8v
> 84 8v
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org