[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 16v questions

To: scirocco-l@scirocco.org
Subject: Re: 16v questions
From: Brett Van Sprewenburg <brett@netacc.net>
Date: Wed, 22 Nov 2000 20:48:24 -0400
In-Reply-To: <Pine.A41.4.21.0011211452560.98446-100000@dante12.u.washington.edu>
References: <Pine.A41.4.21.0011211452560.98446-100000@dante12.u.washington.edu>
Sender: owner-scirocco-l@scirocco.org

>16.5mm front
>25mm rear
>
>-Toby

 From my knowlege, 24mm is correct, as stated by Scott below.
The first upgrade size is 25mm, the 2nd 28mm.  Remember, relative bar
"stiffness" increases as the cube of the diameter...so a 1mm increase is
actually a pretty significant difference.

==Brett

>--
>'87 16v
>
>On Mon, 20 Nov 2000, Scott Williams wrote:
>
> > >> 1) what are the front & back stock swaybar diameters?
> > > 19mm front? 22mm rear?!?!
> > > I think...
> >
> > Nah, the 16v's rear bar is bigger -more like 24mm.
> > I think... :^)
> > --
> > Scott F. Williams
> > NJ Scirocco nut
> > SCCA ProRally driver
> > Hotrod Rabbit GTi
> >
> > Check out our rally team's website!
> > http://www.usrallyteam.com

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '92 Passat 16v (Winter+) | - brett@netacc.net

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org

Follow-Ups:
- Re: 16v questions
  - From: "T. Reed" <treed2@u.washington.edu>

References:
- Re: 16v questions
  - From: "T. Reed" <treed2@u.washington.edu>

Prev by Date: Strut tie bar... Was-Sport Compact Car-rocco featured
Next by Date: Re: 16V purchasing questions
Prev by thread: Re: 16v questions
Next by thread: Re: 16v questions
Index(es):
- Date
- Thread