Re: Replacing Door/Window handles ??

["Owen" <mr.peepers@home.com>]

You're talking door and window handles.  Window handle had 1 screw, pry the
plastic cover plate off and unscrew.   Door handles are a 2 screw affair.
Open door, pry off trip plate, undo one screw under cover plate, the other
screw in inside of the door (near the lock).  and you're done.

      Its pretty easy to install power windows if you get a stock setup with
all the wiring.  just take the old stuff out, bolt the power stuff in (bolts
to same spot) and plug in the wires to the proper spots on the fuse box.
Just make sure you test your window regulator before you shell out the cash.
they get slow sometimes

       HTH,

             Owen, 87 2.0L 16v
             www.geocities.com/motorcity/garage/1571

> How do you replace the Door/Window handles ??
>   Anyone ever replaced manual windows with power windows ??
>
> --
>  =======================================================================
>  |   Etop Udoh     | SOUTHERN POLYTECHNIC STATE UNIVERSITY [89-##]     |
>  |  P.O. Box 4234  |  Http://www.mindspring.com/~s_druid               |
>  |  Marietta, Ga   |  Http://www.freeyellow.com/members7/sdruid        |
>  |     30061       |  Http://www.homestead.com/~s_druid/files/index.htm|
>  |-----------------|  Http://sdruid.iwarp.com                          |
>  |                 |  Http://s_druid.home.mindspring.com               |
>  |                 |  Http://www.geocities.com/siliconvalley/bit/9122  |
>  |    *** s_druid@mindspring.com *** s_druid1@hotmail.com ***          |
>  |                 .....TRUST NO ONE - DENY EVERYTHING.....            |
>  =======================================================================
>
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org