Re: Stainless Brake line install

["Christian Els" <tiAn@usiw.net>]

WD-40 is NO substitute for penetrating oil. Use a bona fide rust
remover/penetrating oil to loosen up your brake line connections, you will
be very surprised at how easy they come loose.

BTDT, have the rounded hose ends :(

tiAn
stuff...


----- Original Message -----
From: Rob Bisch <robbisch@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, July 07, 2000 8:29 AM
Subject: Stainless Brake line install


I finally am going to attempt to install my SS brake lines.  I have soaked
them with WD-40 with hopes that will help.  Does anyone have any other
suggestions as to getting them off without having to cut the lines and
replace all the hard lines.

Thanks
Rob



________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org



--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org