[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Momentum brake kit question




>>>>frustration central<<<<<<

so I go to install my shiny new 11" corrado brakes
this weekend using Momentum Motorsports adaptor kit.
First (passenger) side goes on fine, but I run into a problem 
with the driver's side.  The rotor is not lined up straight in the
carrier and is rubbing on the lower outside part of the carrier.
So I go through the usual checks:
the rotor appears to be true, and the rubbing is constant,
so I don't think it's warped.
the Momentum adaptor looks to be straight.
I cleaned off the hub face and the back of the rotor, so
it sits perfectly on the hub.
So what are the chances the carrier is bent?
What else could cause the rotor to be slightly crooked in 
the carrier?
I know there are a couple of guys out there who have used 
this kit (Riley?), have you run into any similar problems?

thanks....

Alex Ting
Account Manager
Millennium Solutions Group, Inc.
575 Menlo Dr. #4
Rocklin, CA  95765

Phone:  888.801.2001 ext. 228 or 916.630.2001
Fax:  916.630.2000
email:  alext@nu2u.net
icq #19613213


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org