[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: motor mount q & thermoswitch swap
- Subject: Re: motor mount q & thermoswitch swap
- From: Kevin <email@example.com>
- Date: Mon, 14 Sep 1998 00:53:27 -0700
I just put on a new poly front mount with my new engine, and I was suprised
to see it stick so far out, but i'm sure it's supposed to do that. The
thick poly just makes it look like it sticks fathur out.
At 12:21 PM 9/12/98 -0500, you wrote:
>I put on my front motor mount just a bit ago. (The socket/bracket that
>bolts to the frame fell off!) I've got the new, red, poly mount in it now.
> But is it supposed to stick about 3/4" outside the socket? Seems kinda
>far out. How should it look?
>Also put in the cooler-than-factory thermoswitch. Pretty simple. Thanks
>to Jason mailto:firstname.lastname@example.org for the easy-to-follow instructions from
>9-3-98 and to Mark at Adirondack callto:518-882-6534 :P for the switch
>itself. Now, I just gotta see if it works....
>'86 8v red martian (for now)
>To subscribe or unsubscribe, send email to scirocco-Lemail@example.com,
>with your request (subscribe, unsubscribe) in the BODY of the message.
Kevin Fry .:. 81 Scirocco S -- Now with JH power!
San Diego, CA
"If God had meant for us to use the metric system, we would've been born
with ten fingers and ten toes."
To subscribe or unsubscribe, send email to scirocco-Lfirstname.lastname@example.org,
with your request (subscribe, unsubscribe) in the BODY of the message.