Re: FN tranny woes...

["Wm. Josiah Erikson" <josiah@gsinet.net>]

Right on... that's much better! : )
    -Josiah

Ryan Schuermann wrote:

> bah i already bought the JB weld =]
> it was only 9$
> Ryan
>
> > I say I send you my case with bad tranny inside it for $40 and you rebuild that
> > tranny!
> >     -Josiah
> >
> > Ryan Schuermann wrote:
> >
> > > manoh man,almost thought i had my tranny sold, but seems that the
> > > yahoo owner before musta REALLY wanted 100mm inner cvs bcause they
> > > grounded down the driver side of the tranny housing to allow for the
> > > extra clearence, however grinded down a bit too zealously and put a
> > > hole in the casing. so...
> > >
> > > do I..
> > >
> > > 1>tear it all down and sell off the 5th gear (.71)
> > > 2> tear it all apart and have someone weld a small plate
> > > of aluminum and sand it down smooth
> > > 3>weld on a big piece of aluminum and remove the 100mm cv flanges
> > > and sell it off as a 90mm usage only trany?
> > > 4>donate it to a junkyard
> > >
> > > survey says?
> > > Ryan
> > >
> > > --
> > > To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> > > with your request (subscribe, unsubscribe) in the BODY of the message.
> >
> >
> >


--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.