Re: FN tranny woes...

["Ryan Schuermann" <rts@nol.net>]

bah i already bought the JB weld =]
it was only 9$
Ryan

> I say I send you my case with bad tranny inside it for $40 and you rebuild that
> tranny!
>     -Josiah
> 
> Ryan Schuermann wrote:
> 
> > manoh man,almost thought i had my tranny sold, but seems that the
> > yahoo owner before musta REALLY wanted 100mm inner cvs bcause they
> > grounded down the driver side of the tranny housing to allow for the
> > extra clearence, however grinded down a bit too zealously and put a
> > hole in the casing. so...
> >
> > do I..
> >
> > 1>tear it all down and sell off the 5th gear (.71)
> > 2> tear it all apart and have someone weld a small plate
> > of aluminum and sand it down smooth
> > 3>weld on a big piece of aluminum and remove the 100mm cv flanges
> > and sell it off as a 90mm usage only trany?
> > 4>donate it to a junkyard
> >
> > survey says?
> > Ryan
> >
> > --
> > To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> > with your request (subscribe, unsubscribe) in the BODY of the message.
> 
> 
> 

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.