Re: help-- power window install help needed ASAP.

[Riley McDowall <mcm@intergate.bc.ca>]

At 04:12 PM 8/24/98 -0600, Owen wrote:
>1.  what's the best way to get the moisture barrier off?  I ended up
>ripping a bunch of it.  I'll have to fix with some silicone and some lunch
>baggies.  I couldn't get those clips off the door.

when I took mine off I just ripped 'em all off since I knew I'd be making
new ones anyways.  Get some thick plastic from the hardware store and cut
it to the right shape, then throw a bead of silicone all along that little
channel in the sheetmetal, slap on the vapor barrier, then run some duct
tape along the edges (optional but a good idea).

You can pull all those black and white plastic clips off the door.. if you
look closely they work just like the clips that hold the under-dash trays
up.  Find something thin, like a probe or a really small screwdriver, and
push the little plastic pin out.  Then you'll be able to pull the clips out.  

HTH!

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------