[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(Banghead) RE: Master Cylinder - WTF?



When you put MC Hammer on did you have to hold it against the booster to get
the nuts on, or will it sit against it by itself?

On 3/30/07, Daun Yeagley <vwdaun@yahoo.com> wrote:
>
>
> --- Allyn <amalventano1@tds.net> wrote:
>
> > So, do yourself a favor and pick one of these up at your
> > local flaps:
> > http://www.jeephorizons.com/tech/brake_bleed.html
> > This turns brake bleeding into a one person job.  You
> > connect it to the bleeder, draw fluid through until air
> > free, close the
> > bleeder, and move onto the next wheel.  The only concern
> > is drawing the reservoir dry, and to compensate for that,
> > put a tranny
> > fluid nozzle on the brake fluid bottle and invert it into
> > the reservoir - it will auto-maintain reservoir level at
> > the bottom of the
> > nozzle opening.
>
> So I bought one the night before you sent this.  I've
> hooked it up per instructions and....
>
> ...I can't seem to get any fluid through it.  Sure, I can
> get fluid and bubbles if I'm not getting a tight seal, but
> seal off the air leaks around the bleeder screw?  Nope.
> Nothing.
>
> This is SOOO aggravating.  I really NEED to have the car on
> the road in the next couple days, but I'm going bald from
> attempting to do it.
>
> Now what do I do?
>
>
> Daun Yeagley - Wilmington Ohio
> '81 Scirocco S (Deiter)       '86 Scirocco 8v
> '88 Scirocco Slegato (Gino!)  '88 Scirocco 16v
> '96 Passat GLX Wagon          '56 Cessna 172
> The first rule of intelligent tinkering is to save all the parts -
> Ehrlich's Law.
>
>
>
>
> ____________________________________________________________________________________
> Bored stiff? Loosen up...
> Download and play hundreds of games for free on Yahoo! Games.
> http://games.yahoo.com/games/front
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>



-- 
Sean
A-1 x 2