lower stress bar

[scirocco16vr32 at gmail.com (Chris Bennett)]

Yea been there done that... I already have it out and rethreaded,  (bolts
for stress bar)

Does anyone have a part number (or real name) for that triple square driver
from snap-on.  Trying to find it on their site.

Chris


On 6/25/07, Koabi Brooks <koabi.brooks@xxxxxxxxx> wrote:
>
> i just did this yesterday and they will become a bit off if you dont do
> that.  ask me how i know ;)
>
>  On 6/25/07, John S. Lagnese < jlagnese@xxxxxxxxxx> wrote:
>
> > I thread the 19 mm bolts back in to make sure things remain aligned.
> > John
> > ----- Original Message -----
> > From: <julie@xxxxxxxxxxxxxxxxxx>
> > To: "Chris Bennett" <scirocco16vr32@xxxxxxxxx >; "Scirocco List"
> > <scirocco-l@xxxxxxxxxxxx>
> > Sent: Sunday, June 24, 2007 4:46 PM
> > Subject: Re: lower stress bar
> >
> >
> > > 19mm for the 2 main bolts and 13's for the smaller. So Yup, it has to
> > come
> > > out.
> > >
> > >>-----Original Message-----
> > >>From: Chris Bennett [mailto:scirocco16vr32@xxxxxxxxx]
> > >>Sent: Sunday, June 24, 2007 04:16 PM
> > >>To: 'Scirocco List'
> > >>Subject: lower stress bar
> > >>
> > >>Bentley doesn't say it but the lower stress bar has to come out for
> > the
> > >>tranny?
> > >>
> > >>--
> > >>80 Scirocco Callaway Indiana Red
> > >>87 Scirocco 16v Tornado Red
> > >>04 R32 Reflex Silver
> > >>_______________________________________________
> > >>Scirocco-l mailing list
> > >>Scirocco-l@xxxxxxxxxxxx
> > >>http://neubayern.net/mailman/listinfo/scirocco-l
> > >>
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@xxxxxxxxxxxx
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@xxxxxxxxxxxx
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>


-- 
80 Scirocco Callaway Indiana Red
87 Scirocco 16v Tornado Red
04 R32 Reflex Silver